DIC-206 Wire EDM Fluid

Water-soluble wire EDM cutting fluid/wire EDM Fluid

DIC-206 wire EDM fluid is composed of water-soluble substances, and its electro-erosion products can be removed through precipitation and filtration. It does not produce oil stains on the cut workpiece surface, making it a hygienic and safe processing fluid for wire EDM machines. RoHS directive testing showed no detectable levels in any of the 30 sub-items.

Feature of DIC-206 Wire EDM Fluid

Environmentally friendly, non-toxic and non-irritating

DIC206 wire edm fluid is an energy-saving and emission-reducing wire EDM fluid, composed entirely of water-soluble substances.

Fast chip removal and low wire consumption

Electrolytic corrosion products can be removed through precipitation and filtration; it can operate for extended periods with minimal molybdenum wire wear.

Smoother cut workpiece surface

The cut workpiece surface will not produce oil stains, making it easy to cut the material..

How to Use DIC-206 Wire EDM Fluid

1. A suitable filter must be installed on the outlet pipeline of the fluid supply pump to remove larger electrolytic corrosion products, ensuring the cutting process effect and maintaining the long-term use of the working fluid.

2. DIC-206 must not be mixed with other wire EDM fluids.

3. When replacing the original emulsion-type wire EDM fluid (emulsion) with DIC-206, the following should be done:

A. After draining the original emulsion, thoroughly clean the entire fluid supply (circulation) system and all parts of the machine tool that come into contact with the working fluid with an appropriate cleaning agent;

B. Adjust the electrical parameters appropriately and increase the tracking speed; the discharge current can be increased moderately.

4. The oxide layer generated on the machined surface during the cutting process can be removed with alcohol; sandblasting is even more effective.

5. Perform rust prevention protection at least once a week: apply a 20% solution of this product to the exposed metal parts of the machine tool using a cloth or brush. 6. Electrolytic corrosion products that fall on the bridge plate, bracket and workbench should be removed frequently (it is recommended to do so once or twice a week).

Points to note about DIC-206 Wire EDM Fluid

1. We strongly recommend using purified water to dilute the solution!

2. For aluminum wire storage cylinders whose surfaces have not undergone hardening treatment, electrochemical corrosion may occur at the molybdenum wire indentation.